| |
|
Back |
J.A.C Campers
Leisure Vehicle Accessories |
|
| |
For Camper Vans, Motor Homes, Caravans, Horse Boxes & Boats |
|
|
|
|
|
 |
Propex
Hot
Water Heater
Designed for the Caravan, Campervan and Motor Home market this unit has
variable temperature settings.
With sites now offering 'hook ups' as standard the need to have multi
fuelled water heaters is no longer a necessity for a lot of campers.
This unit is idea for campers that can pull up, hook up and switch on to
ensure lashings of hot water.
Specification:-
* Super steel plate inner tank with wet enamel coating making this unit
tough, strong and resistant to corrosion and water scale thus ensuring
long life.
* Ultra thick, non-CFC polyurethane foam to prevent heat loss & reduce
energy costs.
* Super compact design, novel & luxurious appearance, easy to mount.
* Temperature meter and adjustment knob.
* Multiple protection devices against, over temperature, over pressure
and electricity leakage.
Technical
Rated Voltage: 220 V
Rated Power: 900 W
Rated Frequency: 50HZ/60HZ
Rated Current: 4.1A
Rated Pressure: 0.8MPa (116psi)
Min Start-up Pressure: 0.05MPa (7psi)
Rated Water Temperature: 75 degree centigrade
Fitted Socket: 250V, 16A
Heating Efficiency: greater than 90%
Capacity : 10 Litres
Warranty: 5 year tank guarantee
Floor Mounted Brackets
Propex
Hot Water Heater
Ref:30374
Price £189.99
|
|
|
|
|
 |
Propex Malaga Mk 3
Water Heater
The Malaga Mk 3 has efficient gas burner as well as the additional
benefit of a 750 watt electric heating element. providing a quick and
efficient supply of hot water for showering and washing in leisure
vehicles.
Main Features Include:-
* Large 13 litre capacity - for longer washing & showering time.
* Efficient gas burner - for faster warm up.
* 750W element on Malaga E - use on its own or with the gas burner for
even faster hot water.
* Small Flue Terminal - neat appearance outside the leisure vehicle.
* Safe - combustion production are completely sealed from the leisure
vehicle interior.
* Easy to Fit and Service - all controls accessible at the rear of the
unit.
* Electronic Control - turns on the heater at the flick of a switch &
supervises burner operation.
* Automatic resettable overheat cut out facility.
* Compact dimension - more room to route pipe work and ducting where
necessary.
Comes complete with vent kit
Dimensions: Height: 25 mm, Width: 325 mm, Depth: 445mm
Propex Malaga Mk 3
Water Heater
Ref: 30208
Price £341.99
|
|
|
|
|
 |
Propex Malaga Replacement Vent Kit
Replacement Vent kit for The Malaga
Ref: 30621
£19.99
|
|
|
|
|
 |
Propex Adapter Plate
Required if changing from Cascade to Propex
water heater
Propex Adapter Plate
Ref: 30261
Price £19.99
|
|
|
|
|
 |
Truma Ultrastore Water Heater
Truma Ultrastore Powerful gas water heater which can be independent of a
mains electricity supply and can produce a large quantity of hot water.
Particularly for larger hot water requirements.
Main Features Include:-
· water container made of stainless steel (space-saving installation
(only 26 cm high)
· high-performance gas burner (1500 Watt); Electrical heating 230 V /
850 W
· short heating times (heating from 15 °C to 70 °C):
· gas operation only: approx. 34 min
· electrical operation only: approx. 45 min
· gas and electrical operation: approx. 25 min
· closed combustion system with wall flue
· easy and convenient to use, temperature pre-selection approx. 30 °C -
70 °C
· energy-saving shut-off and re-ignition and economical gas consumption
(approx. 95 %)
for all immersion
and pressure pumps up to 2.8 bar
· 10 litre capacity
- Includes Grey Panel Surround
Truma Ultrastore Water Heater
Ref: 30219
Price £369.99
|
|
|
|
|
  |
Morco room sealed water
heater
The sealed water heater gives the installer the option of fitting the
appliance anywhere in the unit, needing no ventilation. The F11-E can be
installed in bedrooms, bathrooms, kitchens and toilets with total
safety. Using a side flue the F11-E does away with unsightly roof flues,
which also makes for easier transport and sighting. The F11-E can be
operated on water pressure as low as 0.18 bar and uses only 35 watts of
mains electricity.
This would allow operation on 12 or 24 watts through a small 50 watt
inverter. A new style, simple control panel with automatic electronic
ignition, offers easy operation.
Dimensions: 330mm (W) x 595mm (H)?x 230mm (D). Technical specification:
Power output range (kw) 6.7-19.2. Water flow range at 25C rise (L/min)
3.7-11. Min operating water pressure (bar) 0.12. Gas and water.
Morco room sealed water heater.
Ref: US670
Price £449.99
|
|
|
|
|
 |
Morco D61E water
heater
Stylish design incorporating diverter hood. Automatic ignition and
flame failure on all burners. Two burner control accommodates a wide
variation of ambient water temperatures and can heat 6 litres of water
in a minute. Safety features include a water spillage device and easy
drain down.
Specification:
Gas type: Butane 28mbar, Propane 37mbar
Heat output: 8.7kW
Gas consumption: 0.8kg/h
Water pressure: Min 1 bar, Max 10bar
Connections: Gas 15mm compression, Water 15mm straight copper
Weight:7.1kg
Dimensions:573mm x 266mm x 190mm
Flue size:83mm
This is a multi-point heater
Morco D61E water
heater
Ref: M017570
Price £280.99
Morco D61B/E Fitting Kit
M017571
£34.99
|
|
|
|
|
|
Rinnai Gas Water Heater
Highly efficient multipoint instantaneous gas heater.
One push electronic system, flame failure device and low pressure cut
out. Will heat water at a rate of 25 degrees C, rise in temperature per
minute for each 5.1 litres delivered making this the ideal unit for use
with a shower.
Dimensions: 389mm (height) x 305mm (width) x 160mm (depth)
This product requires part MD351506 to fit a flue.
Highly efficient multipoint instantaneous gas heater.
This product requires
Rinnai Draught Diverter to fit a flue
Heater
Ref: RGH672
Price £280.99
Draught Diverter
Ref: RGH673
Price £64.99
|
|
|
